Press "Enter" to skip to content

Posts published in “Journal Articles”

Peer-reviewed articles published in international journals.

Integration of computational fluid dynamics simulation and statistical factorial experimental design of thick-wall crude oil pipeline with heat loss

Journal articleAdvances in Engineering SoftwareRukthong, W., Weerapakkaroon, W., Wongsiriwan, U., Piumsomboon, P., Chalermsinsuwan, B. (2015) Advances in Engineering Software, 86, pp. 49-54.

Computation of biomass combustion characteristic and kinetic parameters by using thermogravimetric analysis

Journal articleEngineering JournalIn this study, the response surface methodology and simplex-lattice design were applied to investigate the effect of biomass constituents on the kinetics of biomass combustion, important information for process design. The synthetic biomass made from pure cellulose, xylan…

Effect of Regeneration Temperature on the Composition and Carbon Dioxide Sorption Ability of a K2CO3/Al2O3 Solid Sorbent in a Bubbling Fluidized Bed Reactor

Journal articleChemical Engineering CommunicationsThe effect of the regeneration temperature (150°, 250°, and 350°C) during multiple CO2 cyclic sorption-regeneration cycles of a K2CO3/Al2O3 solid sorbent in a bubbling fluidized bed reactor was evaluated in terms of the CO2 capture capacity and chemical…

Effect of operating parameters inside circulating fluidized bed reactor riser with ring baffles using CFD simulation and experimental design analysis

Journal articleChemical Engineering Research and DesignChalermsinsuwan, B., Samruamphianskun, T., Piumsomboon, P. (2014) Chemical Engineering Research and Design, 92 (11), pp. 2479-2492.

Kinetics of CO2 absorption into a novel 1-diethylamino-2-propanol solvent using stopped-flow technique

Journal articleAIChE JournalA stopped‐flow apparatus was used to measure the kinetics of carbon dioxide (CO2) absorption into aqueous solution of 1‐diethylamino‐2‐propanol (1DEA2P) in terms of observed pseudo‐first‐order rate constant (ko) and second‐order reaction rate constant (k2), in this work. The…

Comparative studies of heat duty and total equivalent work of a new heat pump distillation with split flow process, conventional split flow process, and conventional baseline process for CO2 capture using monoethanolamine

Journal articleInternational Journal of Greenhouse Gas ControlGao, H., Zhou, L., Liang, Z., Idem, R.O., Fu, K., Sema, T., Tontiwachwuthikul, P. (2014) International Journal of Greenhouse Gas Control, 24, pp. 87-97.

Analysis of mass transfer performance of monoethanolamine-based CO 2 absorption in a packed column using artificial neural networks

Journal articleIndustrial & Engineering Chemistry ResearchExact and reliable estimation of mass transfer performance is very important for the design, simulation, and optimization of CO 2 absorption in a packed column. In this study, two types of artificial neural networks (ANNs), namely back-propagation neural…

Characterization of fluidization regime in circulating fluidized bed reactor with high solid particle concentration using computational fluid dynamics

Journal articleKorean Journal of Chemical EngineeringChalermsinsuwan, B., Thummakul, T., Gidaspow, D., Piumsomboon, P. (2014) Korean Journal of Chemical Engineering, 31 (2), pp. 350-363.

Solubility, kinetics, absorption heat and mass transfer studies of CO2 absorption into aqueous solution of 1-Dimethylamino-2-propanol

Journal articleEnergy ProcediaIn this work, the performance of CO 2 absorption into aqueous 1-dimethylamino-2-propanol (1DMA2P) solution was investigated for possible CO 2 absorption application and compared with those of MEA and MDEA. The CO 2 absorption performance was presented in…

Comparisons of particle cluster diameter and concentration in circulating fluidized bed riser and downer using computational fluid dynamics simulation

Journal articleKorean Journal of Chemical EngineeringChalermsinsuwan, B., Gidaspow, D., Piumsomboon, P. (2013) Korean Journal of Chemical Engineering, 30 (4), pp. 963-975.

Design, modeling and simulation of post-combustion co2 capture systems with reactive solvents

Journal articleRecent Progress and New Developments in Post-Combustion Carbon-Capture Technology with Reactive SolventsLiang, Z., Sanpasertparnich, .T.Teerawat, Sema, T., Jiang, .Z., Gelowitz.D., Don, Idem.R., Raphael, Tontiwachwuthikul.P., Paitoon (2013) Recent Progress and New Developments in Post-Combustion Carbon-Capture Technology with Reactive Solvents, pp. 79-…

NMR analysis of amine-CO2-H2O systems with VLE modeling for CO2 capture processes

Journal articleRecent Progress and New Developments in Post-Combustion Carbon-Capture Technology with Reactive SolventsShi, H.S.Huancong S., Naami, A., Idem, R., Sema, T., Liang, Z., Usubharatana, P., Saiwan, C, Tontiwachwuthikul, P. (2013) Recent Progress and New Developments in Post-Combustion Carbon-Capture Technology with Reactive Solvents, pp. 11-31.

Post-combustion CO2 capture: Benefits and future trends in pilot plant studies

Journal articleRecent Progress and New Developments in Post-Combustion Carbon-Capture Technology with Reactive SolventsGelowitz.D., Don, Supap, T., Naami, A., Sema, T., Shi, H.S.Huancong, Wattanaphan, P., Idem, R., Tontiwachwuthikul, P. (2013) Recent Progress and New Developments in Post-Combustion Carbon-Capture Technology with Reactive Solvents, pp. 217-237.

Reaction kinetics of CO2 absorption into reactive amine solutions

Journal articleRecent Progress and New Developments in Post-Combustion Carbon-Capture Technology with Reactive SolventsSema, T., Rayer, A.V., Sumon, K.Z., Shi, H., Naami, A., Liang, Z., Idem, R.Raphael, Tontiwachwuthikul, P.Paitoon (2013) Recent Progress and New Developments in Post-Combustion Carbon-Capture Technology with Reactive Solvents, pp. 33-56.

A novel reactive 4-diethylamino-2-butanol solvent for capturing CO2 in the aspect of absorption capacity, cyclic capacity, mass transfer, and reaction kinetics

Journal articleEnergy ProcediaIn the present work, the performance of a novel reactive solvent, 4-diethylamino-2-butanol (DEAB), was comprehensively investigated and compared with the conventional solvents (e.g., MEA and MDEA) in terms of CO2 absorption capacity, cyclic capacity, mass transfer performance, and…

Simulation of CO2-oil minimum miscibility pressure (MMP) for CO2 enhanced oil recovery (EOR) using neural networks

Journal articleEnergy ProcediaCO2-oil minimum miscibility pressure (MMP) is a key parameter in CO2 enhanced oil recovery (CO2-EOR) process. This work developed a fast and vigorous mathematical method using artificial neural network (ANN) model based on genetic algorithm to predict the…

Erratum: Investigation of mass-transfer performance for CO2 absorption into diethylenetriamine (DETA) in a randomly packed column (Industrial and Engineering Chemistry Research (2012) 51 (12058-12064) DOI: 10.1021/ie300830h)

Journal articleIndustrial & Engineering Chemistry ResearchADVERTISEMENT RETURN TO ISSUEPREVAddition/CorrectionNEXTORIGINAL ARTICLEThis notice is a correctionCorrection for "Investigation of Mass-Transfer Performance for CO2 Absorption into Diethylenetriamine (DETA) in a Randomly Packed Column"Kaiyun Fu, Teerawat Sema, Zhiwu Liang, Helei Liu, Yanqing Na, Huancong Shi, Raphael Idem,…

Part 5c: Solvent chemistry: Solubility of CO 2 in reactive solvents for post-combustion CO2

Journal articleCarbon ManagementConcerns about climate change have propelled research efforts to develop affordable and environmentally benign technologies to capture CO2 from large emission sources, which can subsequently be used either for enhanced oil recovery or stored in other geological storage…

Investigation of mass-transfer performance for CO2 absorption into diethylenetriamine (DETA) in a randomly packed column

Journal articleIndustrial & Engineering Chemistry ResearchThe mass-transfer performance of CO 2 absorption into aqueous diethylenetriamine (DETA) solutions was investigated in an absorption column randomly packed with Dixon rings at 303–303 K and atmospheric pressure, and compared with that of monoethanolamine (MEA), which is…

Computation of mass transfer coefficient and Sherwood number in circulating fluidized bed downer using computational fluid dynamics simulation

Journal articleChemical Engineering and Processing: Process IntensificationPrajongkan, Y., Piumsomboon, P., Chalermsinsuwan, B. (2012) Chemical Engineering and Processing: Process Intensification, 59, pp. 22-35.